Conroe Buying Guide: Feeding the Monster
by Gary Key & Wesley Fink on July 19, 2006 6:20 AM EST- Posted in
- Motherboards
Mushkin eXtreme DDR2-667
The Mushkin DDR2-667 memory arrived with the highest price in our value roundup, an excellent heat spreader design, but performed below average at the DDR2-667 and DDR2-800 settings. We raised the voltages but did not have any success in improving the timings at these settings. However, the Mushkin ran at stock voltages for the low latency DDR2-400 and DDR2-533 settings although the 3-3-3-8 timings at DDR2-533 could not be improved with additional voltage to match the 3-2-2-7 timings of other modules. Also, this is the only memory in our group that would not run 4-3-3 settings at DDR2-800. Although the performance difference is minimal, the cost of this kit indicates the memory should perform better.
Patriot DDR2-667
Patriot Memory provided their Extreme Performance series memory modules that provided above average performance at voltage settings that were more than acceptable for 24/7 operation. The memory comes with stylish heat spreaders and was able to easily clock up to DDR2-900 at extended voltages and 5-5-5-15 timings, though we recommend the lower latencies at DDR2-800.
PQI Turbo DDR2-667
The bargain of the bunch has to be the PQI Turbo kit that is currently selling for around $117 with rebate. While the timing performance of the memory was excellent we had to run at voltages higher than the group's average to meet these settings. The base voltage for this particular model is 2.0V, something to be aware of based upon our results with the other memory modules.
Wintec AMPX DDR2-667
The Wintec AMPX DDR2 Extreme series of memory was the pleasant surprise of the group as it generated excellent timings at low voltages at the lower memory speeds. It performed average at DDR2-800, although the results are more than acceptable.
Comparing Value Memory
All of the memory in the value section was able to run on average 4-3-3-9 settings at DDR2-800 except for the Mushkin modules that were limited to 4-4-4-12 but at a low 2.0V setting. The performance delta is extremely minor and the lower voltages are welcomed, but the Mushkin memory is the most expensive in our group so we naturally expect more from it.
The ability of all our value memory to run at very low latencies at DDR2-667 and 4-3-3-9 latencies at DDR2-800 is just incredible given the average price of $148 for a 2GB kit. Not even a year ago this type of performance in the DDR2 world would have placed this "value" memory at the top of performance charts. We found the Elpida memory to offer higher overclocks at lower memory voltages overall than the Infineon based modules, making it the current leader in value performance memory in our opinion.
The two modules that stood out were the A-Data Vitesta DDR2-533 and Wintec AMPX DDR2-667. During testing, both offered a unique combination of price, performance, and stability. All of the memory reviewed is more than acceptable for a Conroe system and the performance differences are so minor that we suggest choosing a supplier based upon prior experience, warranty, or price in this case. We will be looking at additional value memory modules from other suppliers shortly along with providing performance test results with our new Core 2 Duo Memory test platform.
The Mushkin DDR2-667 memory arrived with the highest price in our value roundup, an excellent heat spreader design, but performed below average at the DDR2-667 and DDR2-800 settings. We raised the voltages but did not have any success in improving the timings at these settings. However, the Mushkin ran at stock voltages for the low latency DDR2-400 and DDR2-533 settings although the 3-3-3-8 timings at DDR2-533 could not be improved with additional voltage to match the 3-2-2-7 timings of other modules. Also, this is the only memory in our group that would not run 4-3-3 settings at DDR2-800. Although the performance difference is minimal, the cost of this kit indicates the memory should perform better.
Mushkin - DDR2-667 - 2x1GB Model # 991512 |
||
CPU Ratio | Memory Speed |
Best Memory Timings (Voltage) |
(4:3) | 400 DDR2 | 3-2-2-5 1.8V |
(1:1) | 533 DDR2 | 3-3-3-8 1.8V |
(4:5) | 667 DDR2 | 3-3-3-10 2.1V |
(2:3) | 800 DDR2 | 4-4-4-12 2.0V |
Patriot DDR2-667
Patriot Memory provided their Extreme Performance series memory modules that provided above average performance at voltage settings that were more than acceptable for 24/7 operation. The memory comes with stylish heat spreaders and was able to easily clock up to DDR2-900 at extended voltages and 5-5-5-15 timings, though we recommend the lower latencies at DDR2-800.
Patriot - DDR2-667 - 2x1GB Model # PDC22G5300LLK |
||
CPU Ratio | Memory Speed |
Best Memory Timings (Voltage) |
(4:3) | 400 DDR2 | 3-2-2-5 1.9V |
(1:1) | 533 DDR2 | 3-2-3-7 1.9V |
(4:5) | 667 DDR2 | 3-3-3-8 2.1V |
(2:3) | 800 DDR2 | 4-3-3-8 2.1V |
PQI Turbo DDR2-667
The bargain of the bunch has to be the PQI Turbo kit that is currently selling for around $117 with rebate. While the timing performance of the memory was excellent we had to run at voltages higher than the group's average to meet these settings. The base voltage for this particular model is 2.0V, something to be aware of based upon our results with the other memory modules.
PQI - DDR2-667 - 2x1GB Model # PQI25400-2GDB |
||
CPU Ratio | Memory Speed |
Best Memory Timings (Voltage) |
(4:3) | 400 DDR2 | 3-2-2-5 2.0V |
(1:1) | 533 DDR2 | 3-2-2-7 2.0V |
(4:5) | 667 DDR2 | 3-2-3-9 2.2V |
(2:3) | 800 DDR2 | 4-3-3-9 2.2V |
Wintec AMPX DDR2-667
The Wintec AMPX DDR2 Extreme series of memory was the pleasant surprise of the group as it generated excellent timings at low voltages at the lower memory speeds. It performed average at DDR2-800, although the results are more than acceptable.
Wintec AMPX - DDR2-667 - 2x1GB Model # 3AXD2675-1G2S-R |
||
CPU Ratio | Memory Speed |
Best Memory Timings (Voltage) |
(4:3) | 400 DDR2 | 3-2-2-5 1.8V |
(1:1) | 533 DDR2 | 3-2-2-7 1.9V |
(4:5) | 667 DDR2 | 3-3-3-8 2.15V |
(2:3) | 800 DDR2 | 4-3-3-9 2.2V |
Comparing Value Memory
All of the memory in the value section was able to run on average 4-3-3-9 settings at DDR2-800 except for the Mushkin modules that were limited to 4-4-4-12 but at a low 2.0V setting. The performance delta is extremely minor and the lower voltages are welcomed, but the Mushkin memory is the most expensive in our group so we naturally expect more from it.
The ability of all our value memory to run at very low latencies at DDR2-667 and 4-3-3-9 latencies at DDR2-800 is just incredible given the average price of $148 for a 2GB kit. Not even a year ago this type of performance in the DDR2 world would have placed this "value" memory at the top of performance charts. We found the Elpida memory to offer higher overclocks at lower memory voltages overall than the Infineon based modules, making it the current leader in value performance memory in our opinion.
The two modules that stood out were the A-Data Vitesta DDR2-533 and Wintec AMPX DDR2-667. During testing, both offered a unique combination of price, performance, and stability. All of the memory reviewed is more than acceptable for a Conroe system and the performance differences are so minor that we suggest choosing a supplier based upon prior experience, warranty, or price in this case. We will be looking at additional value memory modules from other suppliers shortly along with providing performance test results with our new Core 2 Duo Memory test platform.
123 Comments
View All Comments
Roy2001 - Thursday, July 20, 2006 - link
I am looking for OC a E6600 with 4MB cache to 4Ghz with minimum budget and I never OC my system. So I don't know which value board/RAM would meet the target. I don't care about timing/latency. I would like to see anandtech to publish guides for high performance OCers and value OCers and help us to reach max speed.In addition, I can pickup DDR2-800 RAM priced similar to those 667 RAMs, I don't understand why they are not included in review?
Thanks.
SixFour - Thursday, July 20, 2006 - link
Will Conroe work on any nForce 4 SLI Intel Edition motherboard or will it only work on a few of them. A friend offered me an Asus P5ND2-SLI and didn't accept because I didn't have a reason for it. But if Conroe works with it, I was planning on a light usage rig with a new E6300 and a 6600 GT I have lying around.Gary Key - Thursday, July 20, 2006 - link
The only nF4 board that we know of at this time to support Conroe is the Asus P5N32-SLI SE. Based on all indications, this will be the only one as the nf570 for Intel will be the mainstream NVIDIA board with the nf590 falling at the high end ($165 to $205).