System Summaries

Amazingly, we're actually under the $1500 budget with both systems this time. Some of you might argue that $1500 is still too much for a midrange system, but considering that you get everything other than the software and applications, we think that's a pretty reasonable cost. Drop the keyboard, mouse, display, and speakers and you're down to $1000, but of course you need to add in $90-$150 for Windows XP. All told, you may not get the same level of service that you get with a prebuilt OEM system, but the quality of components and performance offered will almost certainly be higher - much higher should you choose to go the overclocking route. Here are the system summaries, but if you're looking for additional options remember to check out the individual component pages where we have listed some alternatives.

AMD Mid-Range System
Hardware Component Price
Processor Athlon 64 X2 3800+ 2x512K 2.0GHz (939) - Retail 297
Motherboard DFI nForce4 SLI Infinity 115
Memory Patriot PC-3200 2x1024MB EPLL (2-3-2-5-1T) 190
Video Card EVGA GeForce 7600GT CO 256MB (580/1500) 184
Hard Drive Western Digital SATA3.0Gbps 250GB 7200RPM 16MB Caviar SE16 95
Optical Drive NEC 3550A (OEM) 37
Case COOLER MASTER Centurion 5 CAC-T05-UW 61
Power Supply ENERMAX Liberty ELT400AWT ATX12V 400W 86
Display BenQ 20 inch 8ms Widescreen LCD FP202W 325
Speakers Logitech X-530 5.1 70W Speakers 62
Keyboard and Mouse Microsoft Comfort Curve 2000 B2L-00047 32
Bottom Line 1484


Intel Mid-Range System
Hardware Component Price
Processor Pentium D 930 2x2MB 3.0GHz (775) - Retail 212
Motherboard ASUS 945P P5LD2 Deluxe 151
Memory G.Skill PC-5300 2x1024MB Extreme LA (4-4-4-12) 148
Video Card EVGA GeForce 7600GT CO 256MB (580/1500) 184
Hard Drive Western Digital SATA3.0Gbps 250GB 7200RPM 16MB Caviar SE16 95
Optical Drive NEC 3550A (OEM) 37
Case COOLER MASTER Centurion 5 CAC-T05-UW 61
Power Supply ENERMAX Liberty ELT400AWT ATX12V 400W 86
Display BenQ 20 inch 8ms Widescreen LCD FP202W 325
Speakers Logitech X-530 5.1 70W Speakers 62
Keyboard and Mouse Microsoft Comfort Curve 2000 B2L-00047 32
Bottom Line 1393


If you're looking for a system that can do just about anything well, both of these qualify. Without any extra tweaking, the AMD system will usually be faster, but the Intel system certainly isn't bad. If you're looking for more performance from the Intel side of things, you might want to try the Core Duo + AOpen + Overclocking route, or else wait for Core Duo 2 to launch. Both systems as configured currently lock you into an "outdated" platform, but we don't generally recommend building systems for upgradeability. You end up spending more money for the potential to upgrade, and when the time comes to finally upgrade you often find that it's better to simply build a new system and sell off your old one.

As always, comments and questions are welcome - either via email or in the comments section. There is no such thing as a "one-size-fits-all" computer, so naturally it is possible to tweak the component choices in order to improve performance in the areas that you need it most. Upgrading the graphics card and downgrading the CPU, for example, is something to consider for gamers. I would still rather just spend the money on a faster GPU and go a bit over budget, however, because I really like my dual core systems.

If you're looking for something significantly cheaper, our next Buyers' Guide will be covering the budget sector, followed by a high-end Buyers' Guide once AMD AM2 platforms have begun shipping. We may also look at doing an HTPC Buyers' Guide in the future - let us know if you're interested in that one.

Speakers and Accessories
Comments Locked

56 Comments

View All Comments

  • jonp - Friday, August 11, 2006 - link

    Just to note, Asus P5LD2, PCB version 2.01G, BIOS version 1207 supports the Core 2 Duo (Conroe) processors!
    http://support.asus.com/cpusupport/cpusupport.aspx">http://support.asus.com/cpusupport/cpusupport.aspx
  • jiulemoigt - Saturday, May 13, 2006 - link

    I really have wonder somedays if reviewers even understand their target audience anymore. My favorite statement in the entire article "CRTs pretty much target the budget market exclusively these days", this has to have been in ignorence, I can understand they weigh too much and take up too much space, but if your suggesting that displays which have higher resolutions and refresh rates being cheaper makes them budget market, I'd love to be the guy that sells you hardware. Most LCD are inferior exspecailly at the prices you talking about, at four hundred dollars you can get a professional crt which will display at 2048x1536 at 75Hz or 1920x1200 at 85Hz.
    So instead of recomending a cheap LCD with questionible quality you might want to point out those CRT displays you personaly dislike as an option for people on a budget to get the best options possible as not everyone can afford the nice LCDs likeone that cost more than the whole system price.

    As to the DVI standard the standard is not the problem the hardware is dell's 30 LCD could probably handle the bandwidth, most CRTs can handle more but most LCD
    can not even hit 1920x1200 at 60Hz and those that do rarely hit the 75Hz DVI standard.
  • JarredWalton - Sunday, May 14, 2006 - link

    As one example, let's check out Newegg.

    http://www.newegg.com/Product/ProductList.asp?Subm...">Here are the 20 inch or larger CRTs

    Both models (yes, there are exactly 2 models currently carried by Newegg) have a maximum resolution of 1600x1200, and the maximum refresh rate at that resolution of 75 Hz. Both are invar shadow mask tubes, which means they are targeting a budget rather than quality. Aperture grille monitors were always better, in my opinion, and they certainly cost more to make.

    http://www.newegg.com/Product/ProductList.asp?Subm...">What about 19 inch CRTs?

    The seven options there aren't any better than what was listed above. One of those displays might actually have an aperture grille tube, but I doubt it. In the past, I used to recommend the NEC FE991SB, which does indeed have an aperture grille tube. I bought one about 18 months ago for $250. That model is no longer available (unless you can get a refurbished display or you find one that has been sitting on the shelf for a couple years), and the newer FE992SB is once again an invar shadow mask tube.

    I have stated this on several occasions in the past, but CRTs are pretty much at a dead and now. If anyone is trying to make newer, better models, I don't know who they are. When I say CRTs are a budget option, what I mean is that you can't get new CRTs that are as good as the top models from three or four years ago. They represent one of the few components in computers that has actually gotten worse in the past two years. It's not that they can't manufacture better displays, but they feel that the market has moved to LCDs, and so any CRTs that they make are looking to cut costs more than anything else.

    I'm sure you can go out and find refurbished displays that are still very good, provided you want to deal with the large size. However, our buyer's guides make a point of recommending hardware that you can easily purchase, and we have never listed used/refurbished products. That's not to say he used to/refurbished is bad, but availability is very sketchy. I hope that explains my statement that CRTs are budget options these days.

    Regards,
    Jarred Walton
    Hardware Editor
    AnandTech.com
  • johnsonx - Wednesday, May 10, 2006 - link

    quote:

    ... and a partridge in a pear tree.


    and I thought I was the only one who tossed that in at the end of a list; I even work it into casual converstation, how about you?
  • Powered by AMD - Tuesday, May 9, 2006 - link

    QUOTE:
    "Plenty of people are still running old socket 478, 462, and 754 systems, and they're perfectly happy with the level of performance and they have. The latest and greatest computer games almost certainly wouldn't run on those older systems without drastically reducing the graphics quality, but if you don't play games you probably won't care about or notice the "missing" performance"

    I disagree. With my X800 XT and my Athlon XP 2300Mhz (real frequency), I can play everything at 1024x768, Im missing better resolutions and maybe AA in some titles, but no more than that. I dont "drastically" reduce visual quality, and I play smooth. When I start to see a Mayor change about smoothness, I ll buy a new PC. Meanwhile, Im done.
  • JarredWalton - Tuesday, May 9, 2006 - link

    I'm thinking specifically about F.E.A.R. and Oblivion. Running at anything less than 1280x1024 qualifies as a pretty major cut in graphical quality, at least in my opinion. Note that I'm not talking about all games here, just the "latest and greatest" -- meaning the most graphically intense. (And no, I don't think graphics makes a game much better. I think I will put that portion" to make that clear.)
  • Belldandy - Tuesday, May 9, 2006 - link

    Good ideas presented. A HTPC guide with respects to HDCP, or at least something about DRM ie DVI-HDCP or some workaround where HD content can be displayed at native resolution at 1080p would be good. Also Home theater reciever audio hookup (with quality recommendations) would be helpful. Also case selection, noise, heat are potential problems that break a HT setup.
  • chinna - Tuesday, May 9, 2006 - link

    We really need one good guide for HTPC soon. There are lot of people interested in building quite HTPCs now-a-days. Hooked to 32/37 LCD these are wonderful. But hardly find any good articles about it. There were few on tomshardware, but those were really a joke.

    I would like to see a good article on how to put together a nice HTPC system with reasonable budget, preferably with HD TV Tuner( not a gamers PC) and proper remote.
  • toyota - Tuesday, May 9, 2006 - link

    whats the point in having a monitor that the 7600gt is going to struggle with? good luck playing any modern games at the native resolution. i think if your are interested in gaming on this level of computer you should stick with a 19 inch lcd. of course you could always spend a little more and get the 7900gt or x1800xt.
  • MNOB07 - Tuesday, May 9, 2006 - link

    I like the guide a lot, but I agree. I would not recommend the 7600GT for a system costing ~$1500, instead I would go for the 7900GT. On the other hand the 7600GT won't be a bad choice if your going to be an early adopter of the best DX10 card when it comes out anyway and are trying to save money.

Log in

Don't have an account? Sign up now