EVGA Launches Single-Slot GeForce GTX 1080 Ti K|NGP|N Hydro Copper
by Anton Shilov on November 27, 2017 4:00 PM EST- Posted in
- GPUs
- EVGA
- GeForce
- GTX 1080 Ti
- K|NGP|N
EVGA has released a version of its custom-built GeForce GTX 1080 Ti K|NGP|N video card with a pre-installed bespoke water block. Courtesy of EVGA's customized selection of video outputs, the card now takes only one slot and therefore can fit into tightly packed systems featuring custom liquid cooling systems. EVGA continues to guarantee that the card’s GPU can be overclocked to over 2 GHz, meaning that what was already one of the world’s fastest video cards now has a factory-installed liquid cooling option.
The liquid-cooled EVGA GeForce GTX 1080 Ti K|NGP|N Hydro Copper graphics card uses the same PCB as the air-cooled original one. The board was designed for overclockers and overclocking: it features a 14 phase digital VRM, 11 thermal sensors in total in critical locations on the PCB (5 on the VRMs, 4 for the vRAM, and two on/near the GPU itself), an EVbot connector for easier volt modding as well as three BIOSes (normal, overclocked, and LN2) that can be activated when needed. Since EVGA guarantees that NVIDIA’s GP102 GPUs on all GeForce GTX 1080 Ti K|NGP|N Hydro Copper graphics cards can be overclocked to at least 2025 MHz in boost mode (up from 1695 MHz out of-the-box), the 'overclocked' BIOS setting is going to be default for most owners of the new card.
The EVGA Hydro Copper waterblock designed specifically for the GeForce GTX 1080 Ti K|NGP|N video card covers the GPU, memory and VRM, it is made of nickel-plated copper with an acrylic cover and aluminum on top. The waterblock is equipped with a hub featuring six connectors for easier installation of tubes as well as a glowing EVGA logotype on the front. To ensure that the card does not bend after a long usage, the graphics card is equipped with a custom backplate designed for EVGA’s GTX 1080 Ti K|NGP|N (KPE). It is noteworthy that the waterblock can be purchased from EVGA separately for $219.99.
EVGA Geforce GTX 1080 Ti K|NGP|N Hydro Copper | |
11G-P4-6799-KR | |
Base Clock | 1582 MHz |
Boost Clock | 1695 MHz, guaranteed to run at 2025 MHz |
Memory Clock | 11016 GT/s |
VRAM | 11 GB GDDRX5 (352-bit) |
TDP | 250 W |
Outputs | 1 × HDMI 2.0b 1 × DL-DVI 3 × Mini-DisplayPort 1.4 |
Power Connectors | 2 x 8-Pin |
Dimensions (L x H) | 11.8" (299.7mm) × 5.61" (142.6mm) - Single Slot |
Cooler Type | Nickel-plated copper with an acrylic cover waterblock |
Price | $1249 |
Apart from its overclocking capabilities, configuration of video outputs is also an important selling point of the GeForce GTX 1080 Ti K|NGP|N Hydro Copper. The card has three Mini DisplayPort 1.4 connectors, an HDMI port, and a DL-DVI-D port, all located in one row. This enabled EVGA to shrink the liquid-cooled graphics card to just one slot while still offering a DL-DVI port, which may be important for those who run tightly-packed systems with multiple add-on cards and a custom-built LCS.
Just like the original GeForce GTX 1080 Ti K|NGP|N edition from EVGA with ICX air cooling early in its lifecycle, the EVGA GeForce GTX 1080 Ti K|NGP|N Hydro Copper is only available directly from the company. The price of the card is $1249, which is $250 higher than the price of the original board. Meanwhile, EVGA itself did not have any GTX 1080 Ti K|NGP|N edition with air cooling in stock at press time, whereas Amazon’s partners offer such cards for $1299.
Related Reading:
- EVGA Unveils its GeForce GTX 1080 Ti K|NGP|N Edition
- EVGA Introduces the GTX 1080 Ti K|NGP|N Edition Video Card
- EVGA's New iCX Range: NVIDIA GPUs with More Control for Cooling
- ZOTAC Announces GeForce GTX 1080 Ti ArcticStorm Liquid-Cooled Graphics Card
- Palit GeForce GTX 1080 Ti HOF Limited Edition Announced: 1.75 GHz and Onboard LCD
Source: EVGA
22 Comments
View All Comments
Vatharian - Tuesday, November 28, 2017 - link
I am so happy to see the power connectors on the back of the card, where it belongs. I never understood the notion of prodding the connectors up.acme64 - Friday, December 1, 2017 - link
Why is the copper block plated with nickle? Wouldn't it be cheaper to just skip the nickle altogether?