Synthetic Benchmarks - ATTO and CrystalDiskMark

Benchmarks such as ATTO and CrystalDiskMark help provide a quick look at the performance of direct-attached storage devices. The results translate to the instantaneous performance numbers that consumers can expect for specific workloads, but do not account for changes in behavior when the unit is subject to long-term conditioning and/or thermal throttling. Yet another use of these synthetic benchmarks is the ability to gather information regarding support for specific storage device features that affect performance.

Kingston claims read and write speeds of up to 2000 MBps for all capacities, and the read side numbers are backed up by the ATTO benchmarks provided below. ATTO benchmarking is restricted to a single configuration in terms of queue depth, and is only representative of a small sub-set of real-world workloads. It does allow the visualization of change in transfer rates as the I/O size changes, with optimal performance being reached around 4 MB for a queue depth of 4. For this queue depth, the writes saturate at around 1.75 GBps and this is well south of the 2000 MBps claimed on the product packaging.

ATTO Benchmarks
TOP: BOTTOM:

CrystalDiskMark. for example, uses four different access traces for reads and writes over a configurable region size. Two of the traces are sequential accesses, while two are 4K random accesses. Internally, CrystalDiskMark uses the Microsoft DiskSpd storage testing tool. The 'Seq128K Q32T1' sequential traces use 128K block size with a queue depth of 32 from a single thread, while the '4K Q32T16' one does random 4K accesses with the same queue configuration, but from multiple threads. The 'Seq1M' traces use a 1MiB block size. The plain 'Rnd4K' one uses only a single queue and single thread . Comparing the '4K Q32T16' and '4K Q1T1' numbers can quickly tell us whether the storage device supports NCQ (native command queuing) / UASP (USB-attached SCSI protocol). If the numbers for the two access traces are in the same ballpark, NCQ / UASP is not supported. This assumes that the host port / drivers on the PC support UASP.

CrystalDiskMark Benchmarks
TOP: BOTTOM:

The bandwidth numbers for specific read workloads exceed Kingston's claims (reaching as high as 2089 MBps for the 2TB version), but writes seem to be capped slightly north of 1800 MBps even for sequential access traces. The reads manage to match bridge-based solutions (including the DIY one), while writes fall behind. In the random access traces, the DRAM-less nature of the controller results in performance loss for high queue depth operations. At low queue depths, the write performance can match the bridge-based solutions with DRAM-equipped NVMe SSDs, while the read numbers fall slightly behind.

Introduction and Product Impressions AnandTech DAS Suite - Benchmarking for Performance Consistency
POST A COMMENT

19 Comments

View All Comments

  • Alistair - Wednesday, November 10, 2021 - link

    $200 CAD at the moment, we don't get a $135 USD price. Pass for now. Hope it drops elsewhere. Reply
  • nicolaim - Wednesday, November 10, 2021 - link

    Ugly Reply
  • nandnandnand - Thursday, November 11, 2021 - link

    Looks fine Reply
  • name99 - Thursday, November 11, 2021 - link

    Ah the internet:

    On even days:
    - stupid sheeple only buy Apple because of looks and fashion

    On odd days:
    - <hard drive | case | headphones | router> suck because they look ugly.

    Never change, internet!
    Reply
  • Lord of the Bored - Monday, November 15, 2021 - link

    Maybe I am, but it's rude to point it out. Jerk. Reply
  • ads295 - Friday, November 12, 2021 - link

    I think there's scope to eliminate the cable altogether and put a male port on the front. But yeah that would block a lot of space around the port, that could be very bad. Reply
  • dwd999 - Monday, November 15, 2021 - link

    Transfer speed is also reduced if the SSD does not have a good method for dissipating heat. Some SSD enclosures have heat pads built into the sides which press on the SSD to transfer heat from the SSD to the outer shell. This can actually be the most important part of an external SSD enclosure. (I obsess about this so much that I bought one of those little hand held fans that I aim at my external SSD enclosures when copying larger amounts of files). Reply
  • creativewarranties221@gmail.com - Tuesday, December 14, 2021 - link

    Our company https://creativewarranties.com was founded by a group of white and blue collar average individuals who were tired of getting the runaround on Product and Service (Labor) warranties that either didn’t come with the purchase, was misplaced or lost over time , at risk of expiring which needs an extension. This daily runaround came from everyday well-known manufacturers and retailers in our local neighborhoods. Reply
  • alltechpride - Monday, December 27, 2021 - link

    The main thing to be aware of Android information recuperation is that you should quit involving your telephone as quickly as time permits. https://alltechpride.com/ This will allow you the best opportunity of getting your record back on the off chance that it is truly lost. Reply

Log in

Don't have an account? Sign up now