Recap: 802.11ac Wireless Networking

We’ve had quite a few major wireless networking standards over the years, and while some have certainly been better than others, I have remained a strong adherent of wired networking. I don’t expect I’ll give up the wires completely for a while yet, but Western Digital and Linksys sent me some 802.11ac routers for testing, and for the first time in a long time I’m really excited about wireless.

I’m not a good representative of normal PC users, but it has been a long time, relatively speaking, since we first saw Draft-N wireless options—Gary Key (now with ASUS) wrote about it what seems like an eternity ago, and in Internet time I suppose seven years is pretty darn close. Granted, 802.11ac has really been “done” for about two years now, but the first laptops to arrive with 11ac adapters are less than a month old—up until now, 11ac has been almost exclusively used for routers and bridges.

Before I get into a few performance specifics of 802.11ac testing, let me start by saying what is bad with 802.11n. The single biggest issue for me is the lack of quality implementations in so many of our devices. If you look at Apple’s MacBook Pro offerings, they’ve all been 3x3:3 MIMO for several years, offering connection speeds of up to 450Mbps. The problem with that “up to 450Mbps” is that it’s influenced by several factors.

Of course you need to know what sort of signal quality you have, but by far the bigger issue is this: are you talking about 2.4GHz 802.11n or 5GHz 802.11n? If you’re talking about the former, you can pretty much throw any thoughts of 450Mbps out the window. The bigger problem with “up to 450Mbps” is that the vast majority of laptops and routers don’t offer such support; Apple's 3x3:3 dual-band implementation is better than 99% of Windows laptops (and yes, I just made up that statistic).

About a year ago, I reviewed a router and repeater from Amped Wireless and found them to be good if not exceptional products. Compared to most of the wireless solutions people end up with, they were a breath of fresh air and I’ve actually been using them for the past year with very few complaints. On the other hand, I’ve had dozens of laptops come and go during the same time frame. Can you guess what the most common configuration is, even on more expensive laptops? If you said “single-band 2.4GHz 1x1:1”, give yourself a cookie.

We’re thankfully starting to see more laptops with dual-band 2x2:2 implementations, but even when you get that there’s still a big difference in actual performance, depending on notebook design, drivers, and other “special sauce”. We’ll see this in the charts on the next page, and it’s often more a statement of a particular laptop’s wireless implementation as opposed to representing what you might get from a particular wireless chipset.

In my opinion, the great thing about 802.11ac then is that any product claiming 802.11ac compliance is automatically dual-band. 11ac actually only works on the 5GHz channels, so for 2.4GHz support it’s no better than existing 802.11n solutions, but it’s fully backwards compatible and, as we’ll see in a moment, you really don’t want to use 2.4GHz wireless networking unless you’re primarily concerned with range of the signal. This is a shorter introductory piece, so don’t expect a full suite of benchmarks, but let’s just cut straight to the chase and say that there are a lot of situations in which I’ve found 802.11ac to be substantially faster than 802.11n.

A Quick Test of Real-World Wireless Performance
Comments Locked


View All Comments

  • Sylvala - Friday, July 19, 2013 - link

    Apple implentation is the best? lol
  • JarredWalton - Sunday, July 21, 2013 - link

    Don't mistake the Air problems with Apple issues in general. Apples WiFi in the past has been far better on most laptops, at least on the MacBook Pro line. They've had dual-band 3x3:3 with two chipsets in their AirPort Extreme for many years now, and the result has been very good performance.
  • phoenix_rizzen - Monday, July 22, 2013 - link

    In the comprehensive review, would it be possible to test combined throughput for multiple clients connected to the same AP?

    While it's great to benchmark/measure the throughput a single client connected to a single AP can achieve, that's not very realistic compared to how wireless is actually used, even in single-family homes. It's very rare you'll see a single device connected to an AP, what with the proliferation of phones, tablets, laptops, and consoles in homes these days. And workplaces are even worse.

    Perhaps as a final benchmark, you could run the download test on every laptop simultaneously and measure the overall throughput from the AP? Would be interesting to see how each AP handles that situation.
  • JarredWalton - Monday, July 22, 2013 - link

    I can certainly try that; usually, though, what you get is a high burst of traffic from one client for a bit, then another high burst, etc. If you are running a file server with lots of wireless clients, you'd really want to go with distributed access points most likely -- unless you're in a small area, and then a single AP might be sufficient.
  • agrntn - Sunday, September 1, 2013 - link

    What is '802.11'?
  • uio77 - Saturday, December 28, 2013 - link

    Hello wireless gurus:

    I just got one of this WD my net bridge AC adapter and connected to the 5G band to a Netgear Nighthawk. To measure how fast the transfer speed is I copied a file from my NAS to my desktop and the speed do not pass 4mbps. I tried changing setting in the router but no luck. The setting in the bridge are almost none. Do any of you have an idea in why this think is given me such a lame speed over AC, Thanks guys
  • mshirley1964 - Monday, April 20, 2015 - link

    I recently upgraded to comcast's x1 platform and it came with a dual band router.
    I just got an 802.11ac usb wifi adapter for my laptop and just check out the before
    and after results:
  • mshirley1964 - Monday, April 20, 2015 - link

    I recently upgraded to comcast's x1 platform and it came with a dual band router.
    I just got an 802.11ac usb wifi adapter for my laptop and just check out the before
    and after results:

    Aint that amazing?!

  • Barney4 - Tuesday, August 11, 2015 - link

    I don't know why others have had problems, but I have had mine running non-stop (apart from electrical blackouts of course) since new.
    That is over 5 years now!
    Not one disconnection or problem - EVER!!
    We have a old federation double brick house, so that causes a little distance problem, but it still gets a signal through 3 walls for a distance of about 50 feet (depending on the connecting device) before losing the signal.
    With only one obstructing wall we get somewhere between 50 to about 75 feet depending on the connecting device.
    I must admit to changing the antennae to a better one (a 9dB) which has given it a much more consistent and stronger signal at distance.
    All I have done is plug it in, set it up and never touched it since.
    I am also running 3x different Uniden cordless phone systems (900mHz, 2.4GHZ and 5GHz), recently I have 2x TV's and 2x computers plus 3x mobile phones which use widi. None of this causes any interference.
    Can not figure out why so many people have had their router"s cause problems, could be some sort of interference problem, maybe even the external devices used, because the Netcomm NP804N has worked just as it is supposed to. And flawlessly!

Log in

Don't have an account? Sign up now