Today marks the release of Intel’s latest update to its Extreme processor line with a trio of Haswell-E models including Intel’s first consumer socketed 8-core product. This is the update from Ivy Bridge-E, which includes an IPC increase, a new X99 chipset, the first consumer platform with DDR4 memory, and a new CPU socket that is not backwards compatible. We managed to get all three CPUs ahead of launch to test.

August 29th, The Haswell-E Launch

As part of PAX Prime today, three major launches are occurring:

- New line of Haswell-E i7 CPUs
- New line of X99 motherboards using the new LGA2011-3 socket
- An upgrade from DDR3 to DDR4 memory, using the new 288-pin slots

Each of these launches is an upgrade over the previous enthusiast models in the market. The Haswell-E processors will support up to 8 cores on i7, the X99 motherboards have increased connectivity and focus on newer storage methods, and the DDR4 memory supports higher frequency memory at lower voltages than DDR3.

Our coverage will be split to cover all three major launches. This article is talking about the Haswell-E CPUs, we will have another article discussing the new X99 chipset and motherboards, with a third about the new DDR4 memory. There is a small amount of overlap in the data between the three, but check out our other articles this week to find out more.

The New CPUs

Getting straight to the heart of the matter, Intel is keeping the enthusiast extreme range simple by only releasing three models, similar to the initial Sandy Bridge-E and Ivy Bridge-E launches.

The top of the line will be the 8-core i7-5960X with HyperThreading, using a 3.0 GHz base frequency and 40 PCIe 3.0 lanes for $999 for 1000 units. This pricing is in line with previous extreme edition processor launches, but the base frequency is quite low. This is due to the TDP limitation: sticking two extra cores produces extra energy lost as heat, and in order to get the TDP down the base clock has to be reduced over the six-core models. This is a common trend we see in the Xeon range, and as a result it might affect the feel of day-to-day performance.

The mid-range i7-5930K model mimics the older i7-4960X from Ivy Bridge-E by having six cores and 40 PCIe 3.0 lanes, however it does differ in the frequencies (the 5930K is slower) and the memory (5930K supports DDR4-2133). Pricing for this model is aimed to be highly competitive at just under the $600 mark.

The entry level model is a slightly slower i7-5820K, also featuring six cores and DDR4-2133 support. The main difference here is that it only has 28 PCIe 3.0 lanes. When I first read this, I was relatively shocked, but if you consider it from a point of segmentation in the product stack, it makes sense. For example:

For Ivy Bridge-E and Sandy Bridge-E, the i7-4820K and i7-3820 CPUs both had four cores, separating it from the other six cores in their series. For Nehalem, the quad core i7-920 was a super low clocked version compared to the quad core i7-965 and hex-core i7-980X which was released later. In these circumstances, the options for the lower $400 part were either fewer cores or lower frequency. Intel has decided to make the lower cost Haswell-E processor with fewer PCIe 3.0 lanes, but this is an even better scenario for most consumers:

Having 28 PCIe 3.0 lanes means dual GPU setups are at PCIe 3.0 x16/x8 (rather than x16/x16), and tri-GPU setups are at x8/x8/x8 (rather than x16/x16/x8). Very few PC games lose out due to having PCIe 3.0 x8 over PCIe 3.0 x16, meaning that performance should be almost identical. On paper, there should be a smaller performance difference with this setup than if the frequency had been reduced, or the fact that people would complain if there were fewer cores. Having six cores puts it above the i7-4790K in terms of market position and pricing, and the overall loss is that an i7-5820K user cannot use 4-way SLI, which is a very small minority to begin with.

The only downside to all the 28 PCIe 3.0 lanes is that there is no physical way to improve the PCIe lane situation. If the frequency was low, the user could overclock. If there were fewer cores, overclocking would also help mitigate that. Despite this, on paper it looks like that performance difference should be minimal.

The raise in TDP from 130W to 140W puts extra strain on user cooling. Intel still recommends its TS13X liquid cooling solution as a bare minimum – this is the same cooling solution Intel suggested for Ivy Bridge-E. Users wanting to overclock might expect another 150W pushing the i7-5960X up to 4.3 GHz (see our overclocking results later in the review), suggesting that an aftermarket thicker/longer radiator liquid cooler might be in order.


The base silicon for the three mainstream Haswell-E processors is of a similar construction to the previous generation, with a dedicated L3 cache in the middle and the processors around the outside connected by a ring:

All eight cores in the silicon will have access to the cache for the top of the line Core i7-5960X. For the six core models, the i7-5930K and the i7-5820K, one pair of cores is disabled; the pair which is disabled is not always constant, but will always be a left-to-right pair from the four rows as shown in the image. Unlike the Xeon range where sometimes the additional cache from disabled cores is still available, the L3 cache for these two cores will be disabled also.

Intel was quite happy to share the dimensions of the die and the transistor counts, which allows us to update this table with the new information:

CPU Specification Comparison
CPU Manufacturing Process Cores GPU Transistor Count (Schematic) Die Size
Intel Haswell-E
22nm 8 N/A 2.6B 356mm2
Intel Haswell
GT2 4C
22nm 4 GT2 1.4B 177mm2
Intel Haswell
22nm 2 GT3 1.3B 181mm2
Intel Ivy Bridge-E
22nm 6 N/A 1.86B 257mm2
Intel Ivy Bridge
22nm 4 GT2 1.2B 160mm2
Intel Sandy Bridge- E 6C 32nm 6 N/A 2.27B 435mm2
Intel Sandy Bridge 4C 32nm 4 GT2 995M 216mm2
Intel Lynnfield
45nm 4 N/A 774M 296mm2
AMD Trinity
32nm 4 7660D 1.303B 246mm2
AMD Vishera
32nm 8 N/A 1.2B 315mm2

This shows how moving from a six core Ivy Bridge-E die to an eight core Haswell-E increases the die area from 257 mm2 to 356 mm2 (a 39% increase) and the number of transistors from 1.86 billion to 2.6 billion (a 40% increase). This means that adding 33% more cores actually requires more space and more transistors. Part of the increase as well might be the migration to a DDR4 memory controller.

The span of the extreme processor space historically from Intel has a distinct pattern. The CPUs with the lower cores are often clocked the fastest, but over time the speed of the SKU with the most cores might match the lower core model. Then when the next update arrives with more cores, the frequency is again reduced:

Intel Extreme Edition Comparison
Sandy Bridge-E
Ivy Bridge-E
<3.0 GHz i7-920 1.0MB L2
8MB L3
3.2 GHz i7-965 1.0MB L2
8MB L3
3.6 GHz   i7-3820 1.0MB L2
10MB L3
3.7 GHz     i7-4820K 1MB L2
10MB L3
3.2 GHz   i7-3930K 1.5MB L2
12MB L3
3.3 GHz i7-980X 1.5MB L2
12MB L3
i7-3960X 1.5MB L2
15MB L3
  i7-5820K 1.5MB L2
15MB L3
3.4 GHz     i7-4930K 1.5MB L2
12MB L3
3.5 GHz i7-990X 1.5MB L2
12MB L3
i7-3970X (150W)1.5MB L2
15MB L3
  i7-5930K 1.5MB L2
15MB L3
3.6 GHz     i7-4960X 1.5MB L2
15MB L3
3.0 GHz       i7-5960X 2.0MB L2
20MB L3

When you take the cache sizes into account (click a CPU to see the cache size), it becomes very difficult to do a like-for-like comparison. For example, the i7-990X and the i7-5930K are both six-core, 3.5 GHz base frequency models, but the i7-5930K has 3MB more L3 cache. Similarly with the i7-980X and the i7-3960X.

Nehalem Sandy


The X99 Chipset

We will go into more detail in our motherboard review piece, but the basic X99 chipset layout from Intel is as follows:

For CPUs with 40 PCIe lanes, the chipset diagram above will allow x16/x16/x8 scenarios or x8/x8/x8/x8/x8 with additional clock generators. For the 28 lane CPU, this becomes x16/x8/x4, which might make some PCIe slots on the motherboard redundant – it is worth checking the manual first which should show each combination. With ASUS motherboards, they have implemented a new onboard button which tells 2x/3x GPU users which slots to go in with LEDs on the motherboard to avoid confusion.

The platform now uses DDR4 memory, which has a base frequency of 2133 MHz. Almost all consumer motherboards will use either one DIMM per channel or two DIMMs per channel, making up to 64GB of memory possible with the latter. Should 16GB UDIMM DDR4 modules come along, it is assumed that with a microcode update, Intel will support these as well.

X99 will also support 10 SATA 6 Gbps ports from the chipset. This is a rather odd addition, because only six of those ports will be RAID capable. Most motherboards will list which ones are specifically for RAID, but this dichotomy makes me believe that the chipset might use a SATA hub on die in order to extend the number of possible ports.

The socket looks roughly the same from X79 to X99, but the main differences include the notches inside the socket, making sure that you cannot misplace the wrong CPU in the wrong socket. The pin layouts are also different, making them incompatible. The socket arms for fixing the CPU in place also change, with X99 arms requiring to be pushed around and out rather than out then in.

All the main motherboard manufacturers will have models ready on day one. These will be in the micro-ATX and ATX form factors, with most models aiming at the high end for functionality and performance such as the ASUS X79 Deluxe and the ASRock X99 OC Formula. There will be a few models for the cheap side of the market, such as the MSI X99S SLI PLUS and the GIGABYTE X99-UD3.

Prices should range from around $230 to $400+. See our X99 motherboard coverage for a more in-depth look.


All the Haswell CPUs will support DDR4 only, and the new DDR4 design means that the DRAM slots will not be able to take DDR3 due to a different placement of the notch and DDR4 has more pins. DDR4 modules are also a slightly different shape whereby the middle pins of the memory are longer than those on the outside.

For motherboards with single sided latches, this can make it a little trickier to put in because the module might feel in place but both ends need to be firmly in the slot.

The CPUs are listed as supporting DDR4-2133 which in terms of JEDEC timings is 15-15-15. This is similar to when DDR3 first launched, at the nice low (but high at the time) speed of DDR3-1066 7-7-7. While DDR4-2133 CL15 sounds slow, DRAM module manufacturers will be launching models up to DDR4-3200 CL16. This turns the DRAM Performance Index (MHz divided by CAS) from 142 to 200.

DDR4 is also at a lower voltage than DDR3, with 2133 C15 modules requiring 1.2 volts. Prior to launch, G.Skill, Corsair, Crucial and ADATA all sent out preview images of their modules, with a few even releasing pricing to etailers ahead of time. 

Modules should be available from DDR4-2133 to DDR4-3200 at launch, with the higher end of the spectrum being announced by both G.Skill and Corsair. See our DDR4 article later this week for more extensive testing.

Haswell-E and the Battle with Xeons

One of the main issues Intel has with its Extreme platform is the respective enterprise platform based on its high end Xeon processors. In the server world, the customers demand a certain level of consistency for each platform to match up with their upgrade and replacement cycle. As a result, while mainstream Haswell processors were launched in June 2013, it has taken another 14 months for the enthusiast versions to hit the market. This cadence difference between mainstream and extreme silicon is primarily driven by the Xeon market requiring the same platform for two generations. In this case, the Sandy Bridge-E and Ivy Bridge-E platforms, with the LGA2011-0 socket, we held in place for three years before the upgrade to Haswell-E with LGA2011-3. If you are wondering why there is the big difference in release date from Haswell to Haswell-E, there is your answer.

That being said, the consumer range of extreme processors is actually a small market for Intel compared to the Xeons. The market is pushed more out of the prosumer level customers that require performance but at a lower cost, or as a platform for Intel to show how fast it can go at a certain power limitation and then allow extreme overclockers to blow through it as much as possible.

The prosumer market is the important one for the consumer grade silicon. For small businesses that rely on CPU limited throughput, such as video editing, video production, scientific computation and virtualization, having the high performance in a single, low-cost product can produce a significant upgrade in throughput, allowing projects to be completed quicker or with more accuracy. While these prosumer would love the higher powered Xeons, the cost is overly prohibitive, particularly in the long term, or the lack of memory overclock capability has a negative effect.

With this long delay in extreme platform upgrades, it gives Intel the chance to test new functionality out on the mainstream segment. One of the prevailing problems with Ivy Bridge-E is that it relies on the X79 chipset which is showing its age. The new Haswell-E platform and the X99 chipset borrows plenty of cues from Z87 and Z97 in terms of input/output and connectivity support, based on the Xeon customer request of ‘SATA Express looks good, we will have that’.

The drive for lower power is also true, even in high performance systems. For datacenters, the majority of the cost of the facility is typically the energy usage for the systems and the cooling. Thus if a datacenter can use a more energy efficient system, it probably will. So the transition from DDR3 to DDR4 also involves a drop in DRAM voltage from 1.5 volts to 1.2 volts. This does not sound like much for a home system with 4-8 DRAM modules, but in a datacenter with several thousand systems, each using 8-64 sticks of memory, saving a few kW helps bring down the power bill.

This extreme cadence will eventually land Intel with a bit of an issue. If the gap between the mainstream CPU architecture and the performance CPU architecture widens more, then at some point there will be a two-generation difference. This means the server side will have to decide if having fewer faster cores with the highest IPC on the market is better than 2-3 year old slower processors. This would also mean a dichotomy based on whatever features are added. This would suggest that at some point, Intel may have to cut out an entire platform of processors but still maintain the two-generation platform consistency that the server market requires.

Competition and Market

Perhaps unsurprising Intel’s main competition is from itself on the consumer CPU side. As in the table above, the 5960X now leads the new charge on 8-core processors with the 6-core i7-5820K sitting at the back with a reduced lane count but also with a reduced price. Doing a direct comparison based solely on frequency and core count we can see that the i7-3960X matches the i7-5820K, showing how the platform evolves (as well as a position of the price point) over time. This bodes well, perhaps suggesting that Skylake-E’s lowest processor will be a similarly specified Haswell-E i7-5960X but with a higher IPC, should the trend continue.

Intel’s nearest challenger for consumer CPUs from outside is still the FX-9590 which we reviewed recently, but at 220W it needs another 50% power and is only competitive in a few choice benchmarks for 1/3 of the cost.

Today’s Coverage

From Intel’s Haswell-E CPU launch, several questions immediately spring to mind:

How much faster is Haswell-E over Ivy Bridge-E?
How well do these CPUs overclock?
I have an i7-3960X at 4.8 GHz / i7-4960X at 4.5 GHz, should I upgrade?
I already have the i7-4960X and run at stock, should I upgrade?
Do the 28 PCIe 3.0 lanes on the i7-5820K affect gaming?

One of the big questions on should I upgrade from X58 or X79 will always be towards the chipset, which we will cover in the motherboard review.

But our testing here aims to answer all these questions, in terms of a stock vs. stock comparison through to an overclocked comparison for prosumers making the most of their enthusiast system or users attempting to go down the low-cost X99 route. All of our benchmark results will be in Bench as well for comparisons to other consumer and server processors. 


Evolution in Performance: IPC and Memory Bandwidth
Comments Locked


View All Comments

  • ol1bit - Tuesday, September 2, 2014 - link

    You would think since intel seems stuck at a specific design speed for the most part(other than die shrink) that AMD could come up with a better architecture. Maybe there is no better architecture out there?
  • coachingjoy - Tuesday, September 2, 2014 - link

    ...With the i7-5820K being two generations newer, it should afford a 10-15% performance improvement in CPU limited benchmarks. This is quite amazing if we consider the release price of the i7-3960X was $990 and the release price of the i7-5820K is $389....

    ha, in three years we have 10-15% performance increase.
  • willis936 - Tuesday, September 2, 2014 - link

    Since those parts are nearly identically clocked with a cost per core core being so low you're really getting about a 280% increase in performance per dollar over three years. Compared to other market segments that have practically stalled out everywhere in x86 land yes it is pretty amazing.
  • LemmingOverlord - Tuesday, September 2, 2014 - link

    about the gaming benchmarks, core count doesn't really make a difference in most of your chosen games... however there are still a few good CPU-benchmark games that come to mind, Civ V and the Supreme Commander series, to mention a couple. In fact I'd keep an eye out for Planetary Annihilation. It's avalilable this weekend, although I'm pretty sure Uber Entertainment would hand one over just for benchmarking.
  • Gonemad - Tuesday, September 2, 2014 - link

    "now the lowest end CPU for the extreme Intel platform". Yep, I'm just using an i7-920, that was exactly at the same spot in its day. Same architecture and memory as the extreme flagship, at a fraction of the cost. Not counting server chips, right?

    Intel Core i7-5820K, you say eh? Hmm... maybe I should write that down for later... Except I'm not planning anything beyond 1080p, then all of these chips and cards are a bit overkill.

    Correction: I want full pedal-to-the-metal at 1080p, perhaps the "average build" should help... right? I appreciate anybody pitching in on the details for a machine to run anything at 1080p (or 1920x1200 actually) at 60 fps, but not more.
  • azazel1024 - Tuesday, September 2, 2014 - link

    I'd like to add what is the most interesting to me is the 5820k. Hexacore cheap (Intel Hexacore, which IMHO is the only kind that matters). I'll likely never have the budget for a $1000 chip and then the system to do it justice.

    However I currently have an i5-3570 OC to 4GHz. Cost something like $380 for processor and board at the time. For what appears to be around $600 I could now get 50% more cores, hyperthreading and probably be able to reliably OC to a "consevative" 4.2GHz for probably >60% performance improvement for less than half again the cost.

    In comparison to moving up to the i7-4770k, which would only cost maybe $50 or so less, with a modest performance improvement (probably only 15-30%).

    It does make me VERY interested in Broadwell-E and Skylake-E, as those are the most likely points at which I might be looking at an upgrade. I do wonder if Skylake-E will see entry level Enthusiast Octocore, and maybe even if it'll mean high end mainstream Skylake Hexacore.

    That would be an interesting decision if 6 or 8 core processors were not terribly far off in price.
  • Nfarce - Wednesday, September 3, 2014 - link

    "However I currently have an i5-3570 OC to 4GHz. Cost something like $380 for processor and board at the time. For what appears to be around $600 I could now get 50% more cores, hyperthreading and probably be able to reliably OC to a "consevative" 4.2GHz for probably >60% performance improvement for less than half again the cost."

    Dude, did you forget about the cost of having to buy DDR4 memory modules? That will throw your numbers out the window.
  • BLOODYHELL - Thursday, September 4, 2014 - link

  • BLOODYHELL - Thursday, September 4, 2014 - link

    What do you guys think for large video editing MMA FIGHTS, WEDDINGS? Trying to save time editing and rendering videos.
  • naxeem - Thursday, September 4, 2014 - link

    Well, since Broadwell is not out yet, I doubt we'll see SkyLake that soon...

Log in

Don't have an account? Sign up now