That Antec designed a new case may not really sound like news. After all, cases are the primary focus of the company, which offers dozens of models. However, this particular release is of special interest as the company has overhauled their lineup with a new flagship case, the Signature S10, a unique tower case of massive proportions. Meant to be Antec's engineering pinnacle, the Signature S10 is an aggressive combination of advanced thermal performance, versatility, and elegant aesthetics.

Measuring 60 cm tall and 59 cm deep (23.7" × 23.2"), the Signature S10 is one of the largest tower cases in existence. It also weights about 18 kg, making it a very heavy case that is certainly not designed for frequent movement. Still, the proportions of a case alone are not stimulating and not what is unique about this particular release. What is perhaps the most important point of the Signature S10 is that it features Antec's patented three chamber design internal architecture.

Exactly as the name suggests, the three chamber design architecture splits the interior of the Signature S10 into three compartments. The entire front of the case is reserved for hard disk drives, the bottom compartment is shared between the PSU and five 2.5" device trays, and the primary compartment is reserved for the main system alone. Note that, despite its size, the Signature S10 does not have any 5.25" drive bays, so the idea of an optical drive is truly dead for this case. However, there is a slot for a short 5.25" device (fan controller, card reader, etc.). The chassis is most likely made out of SECC steel and the buyer is given the choice between aluminum and smoked tempered glass doors for the side panels. If Antec's press release is accurate and we are talking about real glass, not Plexiglass, that would be a sight to behold.

As the Signature S10 is intended to be Antec's engineering pinnacle, the stock cooling of the case is intense. The very architecture of the case is supposed to aid thermal performance, forcing top-down airflow. There are seven stock fans, five 120 mm and two 140 mm, preinstalled into the Signature S10, the models and specifications of which are unknown at this point of time. To limit the insertion of dust, Antec installed micromesh air filters to each individual chamber.  

Obviously, Antec is trying to combine the very elegant appearance of the Signature series with outstanding thermal performance and expandability options, pitching the case as a good match for advanced gaming systems and workstations. Meanwhile it seems as Antec put every bit of their technology on the Signature S10, and the retail price reflects that, as the MSRP is just shy of $500. Consequently the potential market of the Signature S10 is going to be very small (if not very elite) limited to the most hardcore of enthusiasts who are willing to pay a very hefty price in order to combine elegant aesthetics and quality with thermal performance.

Comments Locked


View All Comments

  • Dark_Archonis - Thursday, June 4, 2015 - link

    Also since you missed reading all my replies, I will emphasize that I'm a Silverstone fan first and foremost. Virtually all Silverstone cases have space for optical drives. I could care less about NZXT.
  • genghisquan - Tuesday, June 2, 2015 - link

    Seems cool. The biggest area of innovation is the storage chamber, but it's not really interesting enough to dish out $500.
  • theness - Thursday, June 4, 2015 - link

    Actually there's a vent that helps cooling. This is way more usable and innovative than lets say the Level 10 and 900D.
  • Gigaplex - Friday, June 5, 2015 - link

    It's not the first case I've seen with chambers. Hardly innovation and not what I'd consider patent worthy.
  • bill.rookard - Tuesday, June 2, 2015 - link

    Mmmmm... I really like it. Not $500.00 worth of like, but if I had the scratch, I'd buy it.
  • MikhailT - Tuesday, June 2, 2015 - link

    I re-read the article a few times but I don't see how many drives can be used for the storage chamber? Is it just 6? If it was 9 or more, it would be nicer.
  • meacupla - Tuesday, June 2, 2015 - link

    looks like 6x 3.5" and 8x 2.5"
  • Margalus - Wednesday, June 3, 2015 - link

    is it really "AND" 8x 2.5"? or should it be "OR" 8x 2.5"?
  • meacupla - Wednesday, June 3, 2015 - link

    Check Tom's. Looks like 3x (2x 3.5" + 1x 2.5") up front, and 5x 2.5" at the bottom, in front of the PSU.
  • iamkyle - Wednesday, June 3, 2015 - link

    Once again, Antec will prove that the money it commands versus the actual quality and functionality of the case will be extremely far apart.

    $500? You're getting into CaseLabs territory at that point, and they make a FAR more robust case than Antec dreams of making.

    Mark my words, once we get a production sample, this thing will have plastic somewhere. For $500, I expect NO panelling of this case to be plastic. But that mesh where the I/O ports are on the top? Guaranteed it will be plastic.

    At $250, the Enthoo Primo is still a winner here.

Log in

Don't have an account? Sign up now