Windows 10 Launch Day GPU Support Summaryby Ryan Smith on July 29, 2015 9:00 AM EST
With Windows 10 launching today, the first half of the path to DirectX 12 has at last been laid down. The GPUs have been here for some time, and now Windows, its graphics APIs, and its driver stack are all ready to support DirectX 12 and the advanced graphics capabilities it brings to the table. Now all we need are some DirectX 12 games to complete the rest of the path, and those should start rolling out later in Q4 of this year.
In the meantime we wanted to quickly cover the state of driver support for Windows 10 and DirectX 12, as matters have evolved slightly differently than we were expecting. Around the time of DirectX 12’s announcement, it was announced that AMD’s GCN GPUs, Intel’s Haswell (Gen 7.5) and newer, and NVIDIA’s Fermi and newer GPUs would all support the technology. And while those plans have not changed, we’ve learned this morning that schedules have shifted slightly, and as a result not every GPU slated to get DirectX 12 support will have that support available today.
|DirectX 12 Support Status|
|Current Status||Supported At Launch|
|AMD GCN 1.2 (285/380/Fury Series)||Working||Yes|
|AMD GCN 1.1 (290/260/390/360 Series)||Working||Yes|
|AMD GCN 1.0 (7000/200/370 Series)||Working||Yes|
|NVIDIA Maxwell 2 (900 Series)||Working||Yes|
|NVIDIA Maxwell 1 (750 Series)||Working||Yes|
|NVIDIA Kepler (600/700 Series)||Working||Yes|
|NVIDIA Fermi (400/500 Series)||Not Available||Delayed|
|Intel Haswell (4th Gen Core)||Working||Yes|
|Intel Broadwell (5th Gen Core)||Working||Yes|
Earlier this morning NVIDIA posted a knowledge base article entitled “Windows 10 will not load the NVIDIA display driver for my older graphics card in my PC that has multiple graphics cards”, which addresses the use of mixed generations of GPUs in a single system. In the article NVIDIA notes that WDDM 2.0 drivers – being necessary for DirectX 12 support – are not currently available for their Fermi GPUs. Instead Fermi cards are still using WDDM 1.3 drivers, or in other words the driver base for Windows 8.1.
The article itself is focused on the compatibility issues that can occur mixing WDDM 2.0 and WDDM 1.3 products – basically, you can only have one or the other active at once within a single driver since both modes can’t be used at the same time – however the more important outcome of this article is that it confirms that Fermi DirectX 12 support is behind schedule. NVIDIA is still committed to bringing DirectX 12 support to Fermi, however it will not be available for today’s Windows 10 launch, and NVIDIA has not announced a specific availability date (though if I had to take a guess, I’m thinking the next driver branch).
Ultimately what this means is that only NVIDIA’s Kepler and Maxwell GPUs (the 600 series and newer) will support DirectX 12 as of today’s launch. Meanwhile in committing to supporting Fermi, NVIDIA will be offering DirectX 12 for GPUs about a year and a half older than anything AMD or Intel are supporting, so it’s hard to be too cross with them, but it is at least a minor disappointment that NVIDIA hasn’t been able to adhere to their original schedule. From a gaming perspective NVIDIA still has a few months before any retail games are available, so NVIDIA still has time, though in the meantime this means we’re going to have to wait a bit longer to see what DirectX 12 can do for NVIDIA’s oldest lineup of GPUs.
Finally, support for Intel and AMD GPUs has rolled out as expected. AMD’s Catalyst 15.7 driver offers working DirectX 12 support for all GCN 1.0, 1.1, and 1.2 GPUs, including the newly launched Fury series. And Intel’s latest driver sets for Haswell and Broadwell respectively also enable the necessary driver functionality.
Speaking of GPUs, all three vendors have released new driver versions today to coincide with the launch of Windows 10. So without further adu:
AMD: Catalyst 15.7.1
NVIDIA: Release 353.62
Windows Update should also be distributing these drivers directly.
Source: NVIDIA (via SH SOTN)
Post Your CommentPlease log in or sign up to comment.
View All Comments
HighTech4US - Thursday, July 30, 2015 - linkWhere/How can I check a driver for that?
Looking on the linked page I cannot see the usual Notes section.
Do you need to install the driver first to find out?
Ryan Smith - Thursday, July 30, 2015 - linkDXDIAG can tell you.
YukaKun - Saturday, August 1, 2015 - linkThanks for the answers!
siriq - Thursday, July 30, 2015 - linkDon't support DX 12 yet but will support Dx 12 soon. That is unfortunate Fermi driver is not ready yet for New directx. Let's hope, next month or so will be fixed.
toyotabedzrock - Wednesday, July 29, 2015 - linkThis is why constantly relabeled mobile gpus are a huge problem. There is a large number of recent laptops that shipped with 820m dedicated gpus and they where still shipping them recently!
Notmyusualid - Wednesday, July 29, 2015 - linkI got caught once with the re-branding madness. Still upset to this day....
babadivad - Wednesday, July 29, 2015 - linkWhat about mobile GPUs?
dgmballa - Wednesday, July 29, 2015 - linkthat's disappointing, I have 3 gtx 580 1.5 gig fermis. I was hoping I could finally stack memory on these 3 cards for more performance, I hope this gets fixed soon!
HighTech4US - Wednesday, July 29, 2015 - linkDX12 Driver for Fermi is here: http://www.geforce.com/drivers/results/87789
Gigaplex - Thursday, July 30, 2015 - linkThat driver does not support DX12 on Fermi.